简体中文
English

Products

35-48 meter electrical heating tunnel oven

Introduction:

35-48 meter electrical heating tunnel oven

Technical specification:
(a) Progress induration is much better than intermission induration ,which is decrease furnace heat loss and most products’ heat loss. Saving energy is better. Average induration of product is decreased 25 percent of energy;

(b) Oven car is hydraulic pressure car to pull as slowness speed. As steady speed , it can be ensured products to heat equal;

(c) Set the top horizontal mixing hot air circulation system, standardized centrifugal fan impeller with the posterior lobe, with unique streaming devices and streamline air duct, effectively reduce the temperature difference, enhanced convection heat transfer and air circulation;

(d) Using solid-state relay zero trigger, intelligent instrument control, and more on the control of the temperature measuring point (the temperature control zone temperature control both sides), temperature accuracy; with inspection measurement points, clearly the situation directly reflects the furnace temperature ; also can be equipped with computerized temperature control system-wide kiln; also, according to product specifications and processes need to easily adjust the curing temperature curve;

(e) In operation in the production process, the main temperature control area and the cross section temperature difference is not greater than ± 3 ℃. Curing peak temperature is 200 ℃;

(f) Capacity:4000-6000 ton grinding wheel.